INSTALLATION
Removal / installation · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL IGNITION SWITCH ASSEMBLY |
 |
- Engage the 2 claws to install the ignition switch.
- Connect the ignition switch connector.
| 2.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)
|
 |
- Connect the hood lock control cable assembly.
Connect each connector and the aspirator duct.
- Engage the 3 claws and 10 clips.
Install the lower instrument panel finish panel sub-assembly with the 2 bolts <B>.
| 3.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
|
 |
- Connect the hood lock control cable assembly.
Connect each connector.
Engage the 3 claws and 10 clips.
Install the lower instrument panel finish panel sub-assembly with the 2 bolts <B>.
| 4.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Engage the claw and clip, install the cowl side trim sub-assembly LH.
Install the clip.
| 5.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- Engage the guide and the 8 claws, and install the front door scuff plate LH.
| 6.
INSTALL STEERING COLUMN COVER LOWER |
 |
- Engage the 2 claws to install the steering column cover lower.
- Insert the key into the ignition key cylinder and release the steering lock.
Turn the steering wheel counterclockwise and install the screw.
- Turn the steering wheel clockwise and install the screw.
| 7.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).