2007-2013 Highlander Kluger · Service Manual SECURITIES

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from May 2007

HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  2. Be sure to record the current settings before customization.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


CUSTOMIZE
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the tester on.

  4. Enter the following menus: Body / Entry&Start / Utility / Customize.

  5. Select the setting by referring to the table below.

Entry&Start: 
Display (Item)
Default
Contents
Setting
Warning by Horn*
ON
Function that allows the vehicle horn and theft deterrent horn to be used as warning devices
ON/OFF

HINT:
*: for RHD

← HOW TO PROCEED WITH TROUBLESHOOTING (from Jul 2012)PROBLEM SYMPTOMS TABLE (May 2007 – Jul 2008) →