2007-2013 Highlander Kluger · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE REAR WHEEL

2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY

  1. C165998
    Remove the bolt and the nut, and separate the No. 3 parking brake cable assembly.


3. REMOVE REAR STRUT ROD ASSEMBLY (for 2WD)

  1. C167803
    Remove the 2 bolts, the 2 nuts, and the rear strut rod assembly.

    NOTICE:
    Since stopper nuts are used, loosen the bolts.


4. REMOVE REAR STRUT ROD ASSEMBLY (for 4WD)

  1. C165999
    Remove the 2 bolts, the 2 nuts, and the rear strut rod assembly.

    NOTICE:
    Since stopper nuts are used, loosen the bolts.

← COMPONENTS (from May 2007)INSTALLATION (May 2007 – Jul 2008) →