2007-2013 Highlander Kluger · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT FRONT SEAT OUTER BELT ASSEMBLY

B131510E02

NOTICE:
Do not disassemble the retractor.

  1. Before installing the outer belt, check the ELR.

    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
      If the result is not as specified, replace the outer belt assembly.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →