2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from May 2007


COMBINATION METER ASSEMBLY

NOTICE:
  1. Be sure to record the current value before customizing.

HINT:
The following items can be customized using the intelligent tester.

Combination Meter: 
Tester Display
Default
Contents
Setting
Key Remind Volume
Large
Function to change the volume of the key reminder buzzer.
Large, Medium, Small
Key Remind Sound
Slow
Function to change the frequency of the key reminder buzzer.
Fast, Normal, Slow
Units By Region
- (*1)
Function to change the unit of the display.
km/l, Ml/g
Language
- (*1)
Function to change the language of the display.
English, Chinese
Driver Side Seatbelt Warning Buzzer (*2)
On
Function to turn on/off the seat belt warning buzzer.
On, Off
Front Passenger Side Seatbelt Warning Buzzer (*2)
On
Function to turn on/off the seat belt warning buzzer.
On, Off

HINT:
  1. *1: The default setting depends on the vehicle specification.
  2. *2: This setting is only valid for the buzzer which sounds at the 20 km/h (12 mph) or more.

← HOW TO PROCEED WITH TROUBLESHOOTING (from Jul 2012)PROBLEM SYMPTOMS TABLE (May 2007 – Jul 2008) →