2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


COMBINATION METER ASSEMBLY
*1: w/ Multi-information Display
E146919E01
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E1-1 (IG+) - Body ground
O - Body ground
Ignition switch signal
Ignition switch off
Below 1 V
Ignition switch on (IG)
11 to 14 V
E1-2 (B) - Body ground
G - Body ground
Turn indicator light signal
Ignition switch on (IG), turn signal LH indicator light OFF
Below 1 V
Ignition switch on (IG), turn signal LH indicator light ON
11 to 14 V
E1-3 (B) - Body ground
GR - Body ground
Turn indicator light signal
Ignition switch on (IG), turn signal RH indicator light OFF
Below 1 V
Ignition switch on (IG), turn signal RH indicator light ON
11 to 14 V
E1-4 (SW1) - Body ground
B - Body ground
Light control rheostat signal (Tail cancel switch)
Ignition switch on (IG), turn the light control rheostat knob fully downwards (Tail cancel off)
Below 1 V
Ignition switch on (IG), turn the light control knob rheostat fully upwards (Tail cancel on)
4 to 6 V
E1-7 (S) - Body ground
Y - Body ground
Oil pressure warning light signal
Ignition switch on (IG), oil pressure warning light OFF
11 to 14 V
Ignition switch on (IG), oil pressure warning light ON
Below 1.5 V
E1-8 (WLVL) - Body ground
P - Body ground
Washer level warning light signal
Ignition switch on (IG), WASHER warning light OFF
11 to 14 V
Ignition switch on (IG), WASHER warning light ON
Below 1.5 V
E1-9 (+S) - Body ground
LG - Body ground
Speed signal for other system (Output)
Turn the wheel slowly
Pulse generation
(See waveform)
E1-10 (CHK) - Body ground
W - Body ground
MIL (Check engine warning light) signal
Ignition switch on (IG), MIL ON
Below 1 V
Ignition switch on (IG), MIL OFF
11 to 14 V
E1-11 (P/SB) - Body ground
O - Body ground
Front passenger side seat belt buckle switch signal
Ignition switch on (IG), front passenger side seat belt unfastened
11 to 14 V
Ignition switch on (IG), front passenger side seat belt fastened
Below 1 V
E1-14 (MSSL) (*1) - Body ground
P - Body ground
Steering pad switch signal
Ignition switch on (IG), DISP switch OFF
4 to 6 V
Ignition switch on (IG), DISP switch ON
Below 1 V
E1-16 (LCL+) (*1) - Body ground
SB - Body ground
Multi-information display signal
Ignition switch off
Below 1 V
Ignition switch on (IG)
11 to 14 V
E1-17 (LCL-) (*1) - Body ground
G - Body ground
Multi-information display signal
Ignition switch off
Below 1 V
Ignition switch on (IG)
11 to 14 V
E1-18 (E3) - Body Ground
W-B - Body ground
Ground
Always
Below 1 V
E1-19 (FE) - Body ground
W-B - Body ground
Ground (Fuel ground)
Always
Below 1 V
E1-20 (ES) - Body ground
R - Body ground
Ground (Signal ground)
Always
Below 1 V
E1-21 (B) - Body ground
SB - Body ground
Battery
Always
11 to 14 V
E1-22 (B2) - Body ground
BR - Body ground
Battery
Always
11 to 14 V
E1-23 (TC) - Body ground
R - Body ground
Light control rheostat signal (Tail cancel switch)
Ignition switch on (IG), turn the light control rheostat knob fully downwards
4 to 6 V
Ignition switch on (IG), turn the light control rheostat knob fully upwards
Below 1 V
E1-24 (SW2) - Body ground
BR - Body ground
Light control rheostat signal
Ignition switch on (IG), rheostat knob position is MIN.
Below 1 V
Ignition switch on (IG), rheostat knob position is MAX.
4 to 6 V
E1-25 (CANH) - Body ground
P - Body ground
CAN communication line
-
-
E1-26 (CANL) - Body ground
W - Body ground
CAN communication line
-
-
E1-28 (B/LE) - Body ground
SB - Body ground
Brake fluid level warning light signal
Ignition switch on (IG), BRAKE warning light OFF
11 to 14 V
Ignition switch on (IG), BRAKE warning light ON
Below 1.5 V
E1-29 (SI) - Body ground
BR - Body ground
Speed signal for other system (Input)
Ignition switch on (IG), turn the wheel slowly
Pulse generation
(See waveform)
E1-30 (ILL-) - Body ground
R - Body ground
Illumination signal
Ignition switch on (IG), light control switch is in the HEAD or TAIL position
11 to 14 V
E1-31 (PBLT) - Body ground
BR - Body ground
Passenger seat belt warning light signal
Sit on the passenger seat, ignition switch on (IG), passenger seat belt warning light OFF
11 to 14 V
Sit on the passenger seat, ignition switch on (IG), front passenger side seat belt warning light is blinking
Below 1 V
E1-32 (CHG-) - Body ground
V - Body ground
Charge warning light signal
Ignition switch on (IG), charge warning light ON
Below 1.5 V
Ignition switch on (IG), charge warning light OFF
11 to 14 V
E1-34 (FR) - Body ground
GR - Body ground
Fuel signal
Ignition switch on (IG), fuel level is FULL
Below 2 V
Ignition switch on (IG), fuel level is EMPTY
4 to 7 V
E1-36 (MCLK) (*1) - Body ground
R - Body ground
Multi-information display signal
Ignition switch on (IG)
Pulse generation
E1-37 (MDAT) (*1) - Body ground
Y - Body ground
Multi-information display signal
Ignition switch on (IG)
Pulse generation
E1-38 (SYNC) (*1) - Body ground
L - Body ground
Multi-information display signal
Ignition switch on (IG)
Pulse generation
E1-39 (SW3) - Body ground
P - Body ground
Light control rheostat signal
Ignition switch on (IG), rheostat knob position is MIN.
Below 1 V
Ignition switch on (IG), rheostat knob position is MAX.
4 to 6 V
E1-40 (E2) - Body Ground
W - Body ground
Ground (Power ground)
Always
Below 1 V

  1. I043789E03
    Waveform (Reference): Using oscilloscope:
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms./DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)

    HINT:
    When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.


COMBINATION METER INNER CIRCUIT

  1. Combination Meter Inner Circuit
    E152403E02
    E152404E02
    E152405E01

    Terminal No.
    Wire Harness Side
    E1
    1
    No. 2 Gauge Fuse (IG+)
    2
    Turn Signal Flasher (B)
    3
    Turn Signal Flasher (B)
    4
    Light Control Rheostat (SW1)
    5
    -
    6
    -
    7
    Oil Pressure Switch (S)
    8
    Washer Level Warning Switch (WLVL)
    9
    Each part that uses speed signal (+S)
    10
    ECM (CHK)
    11
    Front Passenger Seat (P/SB)
    12
    -
    13
    -
    14
    Steering Pad Switch (MSSL) (*1)
    15
    -
    16
    Clock Assembly (LCL+) (*1)
    17
    Clock Assembly (LCL-) (*1)
    18
    Ground (E3)
    19
    Fuel Sender Gauge Assembly (FE)
    20
    Ground (ES)
    21
    ECU-B Fuse (B)
    22
    DOME Fuse (B2)
    23
    Light Control Rheostat (TC)
    24
    Light Control Rheostat (SW2)
    25
    CAN Communication Line (CANH)
    26
    CAN Communication Line (CANL)
    27
    -
    28
    Brake Fluid Level Warning Switch (B/LE)
    29
    Skid Control ECU (SI)
    30
    ALTER Fuse (ILL-)
    31
    Hazard Warning Switch (PBLT)
    32
    Generator (CHG-)
    33
    -
    34
    Fuel Sender Gauge Assembly (FR)
    35
    -
    36
    Clock Assembly (MCLK) (*1)
    37
    Clock Assembly (MDAT) (*1)
    38
    Clock Assembly (SYNC) (*1)
    39
    Light Control Rheostat (SW3)
    40
    Ground (E2)
    *1: w/ Multi-information Display

← PROBLEM SYMPTOMS TABLE (from Jul 2012)TERMINALS OF ECU (from Jul 2010) →