2007-2013 Highlander Kluger · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT THROTTLE BODY

  1. A062403E03
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    M+ (2) - M- (1)
    20°C (68°F)
    0.3 to 100 Ω

    If the result is not as specified, replace the throttle body.

← REMOVAL (from Aug 2013)INSTALLATION (May 2007 – Jul 2008) →