2007-2013 Highlander Kluger · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT CRANKSHAFT POSITION SENSOR

  1. A094922
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Temperature
    Specified Condition
    Cold
    1630 to 2740 Ω
    Hot
    2065 to 3225 Ω

    NOTICE:
    1. "Cold" and "Hot" mean the temperature of the coils themselves.
    2. "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

    If the resistance is not as specified, replace the crankshaft position sensor.

← REMOVAL (from Aug 2013)INSTALLATION (May 2007 – Jul 2008) →