ON-VEHICLE INSPECTION
Inspection · Vehicles built from May 2007
| INSPECT COOLER CONDENSER ASSEMBLY |
If the cooler condenser assembly fins are dirty, clean them with water and dry with compressed air.
- NOTICE:
- Do not damage the cooler condenser assembly fins.
If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.
| INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT |
Using a gas leak detector, check pipe joints for gas leakage.
If gas leakage is detected in a joint, check the torque of the joint.
