2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


GENERAL
  1. To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a television camera mounted on the back door. The system displays the image on the clock assembly (multi-information display).

  2. This system consists of the following components:

    1. Clock assembly (multi-information display)

    2. Television camera assembly

    3. Park/neutral position switch assembly


FUNCTION OF COMPONENTS
  1. The clock assembly (multi-information display) controls the system by using information from the following components:

    Item
    Function
    Television Camera Assembly
    1. Mounted on the back door to transmit an image of the area behind the vehicle to the clock assembly (multi-information display).
    2. Has a color video camera that uses a Charge Coupled Device (CCD) and a wide-angle lens.
    Clock Assembly (Multi-Information Display)
    1. Receives video signals, which contain images of the area behind the vehicle taken with the television camera assembly.
    2. Performs control of the system by receiving the shift position signal from the park/neutral position switch assembly.
    3. Displays the rear view monitor image on the display panel.
    Park/Neutral Position Switch Assembly
    Transmits a reverse signal to the clock assembly (multi-information display).


OPERATION EXPLANATION
  1. The clock assembly (multi-information display) receives the reverse signal when the shift lever is moved to R. After receiving the reverse signal, the clock assembly (multi-information display) switches from except the rear view monitor system to the rear view monitor system.

← SYSTEM DESCRIPTION (May 2007 – Jun 2010)HOW TO PROCEED WITH TROUBLESHOOTING (May 2007 – Jul 2008) →