2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

FAIL-SAFE CHART

System information · Vehicles built May 2007 – Jun 2010

If the television camera ECU detects a malfunction, the fail safe functions shown in the table below operate.
Malfunctioning Parts
Detection Condition
"Parallel Parking Assist Mode" Fail-safe Function
"Manual Assist Mode" Fail-safe Function
Steering angle sensor
  1. Sensor signal transmission malfunction
  2. Open circuit in sensor signal
Switches to the "Manual Assist Mode" automatically
-
Transmission of neutral steering point correction incomplete signal
Displays "SYSTEM INITIALIZING"
-
Communication malfunction between the steering angle sensor and television camera ECU
Switches to the "Manual Assist Mode" automatically
-
Television camera
Transmission of television camera malfunction signal
Stops signal reception and displays a dark screen
Television camera ECU
Malfunction of television camera ECU unit
Stops system operation
Navigation ECU
(Navigation receiver assembly)
  1. No response from navigation ECU
  2. Transmission of navigation ECU malfunction signal
Switches to the "Manual Assist Mode" automatically
-
← DTC CHECK / CLEAR (Aug 2008 – Jun 2010)DIAGNOSTIC TROUBLE CODE CHART (May 2007 – Jul 2008) →