INSPECTION
Inspection · Vehicles built from May 2007
| INSPECT OUTER MIRROR SWITCH ASSEMBLY |
![]() ![]() |
The L position of the left/right adjustment switch: Measure the resistance according to the value(s) in the table below.
- Standard resistance (for left side):
Tester Connection
Switch Condition
Specified Condition
4 (MLV) - 8 (B)
6 (M+) - 7 (E)
UP
Below 1 Ω
OFF
10 kΩ or higher
4 (MLV) - 7 (E)
6 (M+) - 8 (B)
DOWN
Below 1 Ω
OFF
10 kΩ or higher
5 (MLH) - 8 (B)
6 (M+) - 7 (E)
LEFT
Below 1 Ω
OFF
10 kΩ or higher
5 (MLH) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Below 1 Ω
OFF
10 kΩ or higher
The R position of the left/right adjustment switch: Measure the resistance according to the value(s) in the table below.
- Standard resistance (for right side):
Tester Connection
Switch Condition
Specified Condition
3 (MRV) - 8 (B)
6 (M+) - 7 (E)
UP
Below 1 Ω
OFF
10 kΩ or higher
3 (MRV) - 7 (E)
6 (M+) - 8 (B)
DOWN
Below 1 Ω
OFF
10 kΩ or higher
2 (MRH) - 8 (B)
6 (M+) - 7 (E)
LEFT
Below 1 Ω
OFF
10 kΩ or higher
2 (MRH) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Below 1 Ω
OFF
10 kΩ or higher


