2007-2013 Highlander Kluger · Service Manual TRANSMISSION

ADJUSTMENT

Removal / installation · Vehicles built from May 2007


1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. C099453E02
    Loosen the 2 bolts of the park/neutral position switch and move the shift lever to the N position.

  1. Align the groove with the neutral basic line.

  1. Hold the switch in position and tighten the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. After adjustment, inspect the park/neutral position switch assembly operation (Click here).

← INSPECTION (from May 2007)INSTALLATION (May 2007 – Jul 2008) →