2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT FRONT DOOR COURTESY SWITCH

  1. Measure the resistance according to the value(s) in the table below.

    E142632E04

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - Switch body
    Not pushed (ON)
    Below 1 Ω
    Pushed (OFF)
    10 kΩ or higher

    If the result is not as specified, replace the switch.

← REMOVAL (from May 2007)INSTALLATION (from May 2007) →