2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

01-E0 Registration Complete Indication Error

Diagnostic trouble codes · Vehicles built May 2007 – Jun 2010

Also covers:

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
01-E0
"Registration complete" signal from the master device cannot be received.
-
01-E3
The registration demand signal from the slave device is output. Or the registration demand signal is output by receiving connection confirmation signal from the sub-master device.
-
01-E4
The multiple frame transmission is incomplete.
-

HINT:
Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage.


INSPECTION PROCEDURE

HINT:
  1. After the inspection is completed, clear the DTCs.
  2. These DTCs do not indicate a malfunction.


← 01-DF Master Error (Aug 2008 – Jun 2010)01-E2 ON / OFF Indication Parameter Error (May 2007 – Jul 2008) →