2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

01-E2 ON / OFF Indication Parameter Error

Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
01-E2
The signal for ON/OFF control from the master device has a problem.
Navigation receiver assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.


1. REPLACE NAVIGATION RECEIVER ASSEMBLY

HINT:
REMOVAL (Click here)


NEXT

END


← 01-E2 ON / OFF Indication Parameter Error (May 2007 – Jul 2008)21-10 Panel Switch Error (+ 7 more codes) (May 2007 – Jul 2008) →