2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


INSPECT STEERING PAD SWITCH

  1. Measure the resistance according to the value(s) in the table below.

    E146927E06

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    z2-7 (DISP) - z2-8 (EAU)
    DISP switch is not pushed in
    10 kΩ or higher
    z2-7 (DISP) - z2-8 (EAU)
    DISP switch is pushed in
    Below 1 Ω

    HINT:
    If the value is not as specified, replace the steering pad switch (Click here).

← INSPECTION (Aug 2008 – Jun 2010)INSTALLATION (May 2007 – Jul 2008) →