2007-2013 Highlander Kluger · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from May 2007


1. REMOVE FRONT DIFFERENTIAL RING GEAR

  1. D026445E08
    Place matchmarks on the front differential ring gear and differential case.

  1. D026446
    Remove the 14 bolts.

  1. C050237
    Using a plastic hammer, tap on the front differential ring gear to remove it from the case.


2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

  1. D025595E01
    Using SST, remove the front differential case front differential tapered roller bearing from the differential case.
    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00490)
    09950-40011   (09957-04010)

  1. D025596E02
    Using SST, remove the front differential case front tapered roller bearing outer race.
    SST
    09308-00010  


3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

  1. D025597E03
    Using SST, remove the front differential case rear tapered roller bearing from the differential case.
    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00490)
    09950-40011   (09957-04010)
    09308-00010  

  1. D025598E01
    Using SST, remove the front differential case rear tapered roller bearing outer race.
    SST
    09308-00010  


4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

  1. C050240
    Using a pin punch and hammer, install the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.


5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT

  1. C050241E06
    Remove the No. 1 front differential pinion shaft from the differential case.


6. REMOVE FRONT DIFFERENTIAL SIDE GEAR

  1. C050242
    Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.


7. REMOVE TRANSAXLE HOUSING OIL SEAL

  1. D025599E01
    Using SST and a hammer, remove the oil seal.
    SST
    09950-70010   (09951-07100)
    09215-00013   (09215-00471)


8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

  1. D025600E01
    Using SST, remove the oil seal.
    SST
    09950-70010   (09951-07100)
    09608-10010  

← COMPONENTS (from May 2007)INSPECTION (from May 2007) →