2007-2013 Highlander Kluger · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT TRANSMISSION WIRE

  1. C161942E02
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (THO) - 6 (E2)
    10°C (50°F)
    5 to 8 kΩ
    1 (THO) - 6 (E2)
    25°C (77°F)
    2.5 to 4.5 kΩ
    1 (THO) - 6 (E2)
    110°C (230°F)
    0.22 to 0.28 kΩ

    If the resistance value is not as specified, replace or repair the transmission wire.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →