2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT GLOVE BOX LIGHT ASSEMBLY

  1. I044128E06
    Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 2.

  1. Check that the light comes on when the glove box light switch is on (not pushed).

    OK:
    Glove box light comes on.

    If the result is not as specified, replace the glove box light assembly.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →