2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


INSPECT TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System)

  1. E074066E09
    Connect the (+) lead from battery to the terminal 2 and the (-) lead to terminal 6.

  1. Check that the ignition key cylinder light comes on.

    OK:
    The ignition key cylinder light comes on.

    If the result is not as specified, replace the transponder key amplifier.


INSPECT KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System)

  1. E151696E02
    Connect the (+) lead from battery to the terminal 1 and the (-) lead to terminal 2.

  1. Check that the ignition key cylinder light comes on.

    OK:
    The ignition key cylinder light comes on

    If the result is not as specified, replace key cylinder light assembly.

← REMOVAL (from Jul 2010)INSPECTION (from Jul 2010) →