TORQUE SPECIFICATIONS
Specifications · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Camshaft timing oil control valve assembly x Cylinder head cover sub-assembly |
10 |
102 |
7 |
| Harness protector x Cylinder head cover sub-assembly |
8.3 |
84 |
73 in.*lbf |
| Harness clamp bracket x Cylinder head cover sub-assembly |
8.3 |
84 |
73 in.*lbf |
| Throttle body x Intake air surge tank assembly |
10 |
102 |
7 |
| Duty vacuum switching valve x Front engine mounting insulator assembly |
4.0 |
41 |
35 in.*lbf |
| Front engine mounting insulator assembly x Front frame assembly |
52 |
530 |
38 |
| Transverse engine mounting bracket x Automatic transaxle assembly |
64 |
653 |
47 |
| Transverse engine mounting bracket x Front engine mounting insulator assembly |
87 |
887 |
64 |
| ECM bracket (for LHD ) x Instrument panel reinforcement assembly |
8.5 |
87 |
75 in.*lbf |
| ECM bracket (for RHD) x Instrument panel reinforcement assembly |
8.0 |
82 |
71 in.*lbf |
| No. 2 ECM bracket x Blower assembly |
8.0 |
82 |
71 in.*lbf |
| Accelerator pedal assembly x Body |
4.9 |
50 |
43 in.*lbf |
| VVT sensor x Cylinder head cover sub-assembly |
10 |
102 |
7 |
| Crankshaft position sensor x Cylinder block sub-assembly |
10 |
102 |
7 |
| Engine coolant temperature sensor x Cylinder head sub-assembly |
20 |
204 |
15 |
| Knock control sensor x Cylinder block sub-assembly |
20 |
204 |
15 |
| Air fuel ratio sensor (bank 1) x Exhaust manifold sub-assembly RH : for use with SST |
40 |
408 |
30 |
| Air fuel ratio sensor (bank 1) x Exhaust manifold sub-assembly RH : for use without SST |
44 |
449 |
32 |
| Air fuel ratio sensor (bank 2) x Exhaust manifold sub-assembly LH : for use with SST |
40 |
408 |
30 |
| Air fuel ratio sensor (bank 2) x Exhaust manifold sub-assembly LH : for use without SST |
44 |
449 |
32 |
| Heated oxygen sensor (bank 1) x Front No. 3 exhaust pipe sub-assembly : for use with SST |
40 |
408 |
30 |
| Heated oxygen sensor (bank 1) x Front No. 3 exhaust pipe sub-assembly : for use without SST |
44 |
449 |
32 |
| Heated oxygen sensor (bank 2) x Front exhaust pipe assembly : for use with SST |
40 |
408 |
30 |
| Heated oxygen sensor (bank 2) x Front exhaust pipe assembly : for use without SST |
44 |
449 |
32 |