2007-2013 Highlander Kluger · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FUEL PUMP RESISTOR

  1. A175691
    Disconnect the connector.

  1. Remove the nut and the fuel pump resistor.

  1. A175692
    Remove the fuel pump resistor cover.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →