INSTALLATION
Removal / installation · Vehicles built from May 2007
| 1.
INSTALL TRANSMITTER BATTERY |
 |
- Install a new battery (lithium battery) with the positive (+) side up as shown in the illustration.
- Press down gently on the battery to set it in place.
- NOTICE:
- Be sure that the positive and negative sides of the transmitter battery are positioned correctly.
- Be careful not to bend the terminals of the transmitter battery during installation.
- Keep the interior of the transmitter case free of dust, water, and oil.
- Install the cover by pressing it as shown in the illustration.
- Install the mechanical key.
- HINT:
- After the installation, press one of the transmitter switches and check that the LED illuminates.