2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

  1. for Type A:

    1. B175044E01
      Slide the inner rear view mirror assembly in the direction indicated by the arrow in the illustration to install it.
      Text in Illustration 
      *1
      Lock Lever

      NOTICE:
      Confirm that the lock lever is surely installed.

    2. Engage the 2 claws to install the inner mirror base cover.

  1. for Type B:

    1. B279252
      Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration.

    2. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

      Torque:
      1.8 N*m{ 18 kgf*cm , 16 in.*lbf }


2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

  1. B175043
    Using a "TORX" socket wrench (T20), install the inner rear view mirror with the screw.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }


3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

  1. B175049
    Engage the 2 claws and install the inner rear view mirror stay holder cover.

  1. B175050E01
    Engage the 2 claws and install the inner rear view mirror stay holder cover as shown in the illustration.

← INSTALLATION (May 2007 – Jun 2010)COMPONENTS (May 2007 – Jun 2010) →