2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE OUTER MIRROR GLASS (w/o Heater)

  1. B173445E01
    Apply protective tape to the bottom of the visor of the door mirror.

  1. Push the upper part of the mirror surface and tilt it.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

  1. B173446
    Disengage the 2 claws at the upper part of the outer mirror.

  1. Remove the outer mirror glass.


2. REMOVE OUTER MIRROR GLASS (w/ Heater)

  1. B173445E01
    Apply protective tape to the bottom of the visor of the door mirror.

  1. Push the upper part of the mirror surface and tilt it.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

  1. B173446
    Disengage the 2 claws at the upper part of the outer mirror.

  1. B173447
    Disconnect the connectors and remove the outer mirror glass.

← COMPONENTS (from May 2007)INSTALLATION (from May 2007) →