REASSEMBLY
Removal / installation · Vehicles built from May 2007
| 1.
INSTALL NO. 2 POSITION INDICATOR SLIDE COVER |
 |
- Install the position indicator slide cover to the No. 2 position indicator slide cover.
| 2.
INSTALL POSITION INDICATOR SLIDE COVER |
 |
- Install the position indicator slide cover to the position indicator housing lower.
- NOTICE:
- Install the No. 2 position indicator slide cover with the boss facing the rear of the vehicle.
| 3.
INSTALL POSITION INDICATOR HOUSING LOWER |
 |
- Engage the 4 claws and install the position indicator housing lower to the position indicator housing.
- NOTICE:
- Make sure that the claws are firmly engaged.
| 4.
INSTALL POSITION INDICATOR LIGHT GUIDE |
 |
- Engage the 4 claws and install the position indicator light guide to the position indicator housing lower.
- NOTICE:
- Make sure that the claws are firmly engaged.
| 5.
INSTALL POSITION INDICATOR LIGHT BULB |
 |
Install the cap to the bulb.
install the bulb to the position indicator light wire socket.
| 6.
INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
 |
- Install the indicator light wire sub-assembly to the position indicator light guide.
| 7.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY |
 |
- Engage the 4 claws and install the position indicator housing to the shift lever assembly.
- NOTICE:
- Make sure that the claws are firmly engaged.
Connect the wire harness clamp to the shift lock control unit.
- Connect terminals (4) and (8) of the indicator light wire.
Push the stopper.
- Connect the connector and 2 wire harness clamps to the shift lock control unit.