2007-2013 Highlander Kluger · Service Manual BODY

DISPOSAL

Removal / installation · Vehicles built from May 2007


1. DISPOSE OF BACK DOOR STAY ASSEMBLY
  1. Secure the back door stay assembly horizontally in a vise with the piston-rod pulled out.

  1. B127037E01
    Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

    NOTICE:
    Although the gas inside the back door stay assembly is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.

← INSTALLATION (from May 2007)COMPONENTS (from May 2007) →