2007-2013 Highlander Kluger · Service Manual CRUISE CONTROL SYSTEM

TERMINALS OF ECM

System information · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


CHECK ECM
E127018E07
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
D31-15 (STP) - B3-1 (E1)
R - W-B
Stop light signal
Ignition switch on (IG), Depress brake pedal
11 to 14 V
D31-15 (STP) - B3-1 (E1)
R - W-B
Stop light signal
Ignition switch on (IG), Release brake pedal
Below 1 V
D31-16 (ST1-) - B3-1 (E1)
LG - W-B
Stop light signal
Ignition switch on (IG), Depress brake pedal
Below 1 V
D31-16 (ST1-) - B3-1 (E1)
LG - W-B
Stop light signal
Ignition switch on (IG), Release brake pedal
11 to 14 V
D31-23 (TC) - B3-1 (E1)
L - W-B
Terminal TC of DLC3
Ignition switch on (IG)
11 to 14 V
D31-23 (TC) - B3-1 (E1)
L - W-B
Terminal TC of DLC3
Connect terminals TC and CG of DLC3
Below 1 V
D32-2 (CCS) - B3-1 (E1)
R - W-B
Cruise control main switch circuit
Ignition switch on (IG)
11 to 14 V
D32-2 (CCS) - B3-1 (E1)
R - W-B
Cruise control main switch circuit
CANCEL switch ON
6.6 to 10.1 V
D32-2 (CCS) - B3-1 (E1)
R - W-B
Cruise control main switch circuit
SET/COAST switch ON
4.5 to 7.1 V
D32-2 (CCS) - B3-1 (E1)
R - W-B
Cruise control main switch circuit
RES/ACC switch ON
2.3 to 4.0 V
D32-2 (CCS) - B3-1 (E1)
R - W-B
Cruise control main switch circuit
MAIN switch ON
Below 1 V
D32-21 (D) - B3-1 (E1)
BR - W-B
D shift position signal
Ignition switch on (IG), shift lever except D position
Below 1 V
D32-21 (D) - B3-1 (E1)
BR - W-B
D shift position signal
Ignition switch on (IG), shift lever D position
11 to 14 V
← PROBLEM SYMPTOMS TABLE (from Jul 2012)TERMINALS OF ECM (from Jul 2010) →