2007-2013 Highlander Kluger · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL NO. 2 COOLING FAN MOTOR

  1. A169424
    Install the fan motor with the 3 screws.

    Torque:
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf }


2. INSTALL NO. 1 COOLING FAN MOTOR

  1. A169423
    Install the fan motor with the 3 screws.

    Torque:
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf }


3. CONNECT COOLING FAN MOTOR CONNECTORS

  1. A169422
    Connect the cooling fan motor connectors.


4. INSTALL FAN

  1. A169421
    Install the 2 fans with the 2 nuts.

    Torque:
    6.3 N*m{ 64 kgf*cm , 56 in.*lbf }


5. INSTALL FAN ASSEMBLY WITH MOTOR

  1. A169447E01
    Put in the fan assembly with motor to the radiator assembly.

  1. Install the fan assembly with motor with the 3 bolts.

    Torque:
    7.8 N*m{ 80 kgf*cm , 69 in.*lbf }

  1. A169443
    Connect the radiator reserve tank hose or pipe to the radiator assembly.


6. INSTALL RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR

HINT:
Click here

← REMOVAL (from Jul 2010)INSTALLATION (Aug 2008 – Jun 2010) →