2007-2013 Highlander Kluger · Service Manual CRUISE CONTROL SYSTEM

P0607 Input Signal Circuit Malfunction

Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

DESCRIPTION

This DTC indicates internal abnormalities of the ECM.
DTC No.
Detection Item
Trouble Area
P0607
The ECM has a supervisory CPU and control ECU inside. When each input STP signal is different for 0.15 sec. or more, this trouble code is output.
This trouble code is output after 0.4 sec. has passed from the time the cruise cancel input signal (STP input) is input into the ECM.

HINT:
When a trouble code is detected, the fail safe must be kept on until the ignition switch is turned off.

ECM

INSPECTION PROCEDURE


1. REPLACE ECM
  1. Replace the ECM (for 2GR-FE) (Click here).


NEXT

END


← P0607 Input Signal Circuit Malfunction (May 2007 – Jul 2008)Cruise Control Switch Circuit (May 2007 – Jul 2008) →