INSPECTION
Inspection · Vehicles built from May 2007
| INSPECT REAR DOOR LOCK ASSEMBLY LH |
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Locked
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Unlocked
Measure the resistance of the door lock position switch.
- Standard resistance:
Tester Connection
Measurement Condition
Door Lock Condition
Specified Condition
6 - 9
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Locked
10 kΩ or higher
6 - 9
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Unlocked
Below 1 Ω
| INSPECT REAR DOOR LOCK ASSEMBLY RH |
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Locked
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Unlocked
Measure the resistance of the door lock position switch.
- Standard resistance:
Tester Connection
Measurement Condition
Door Lock Condition
Specified Condition
6 - 9
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Locked
10 kΩ or higher
6 - 9
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Unlocked
Below 1 Ω
