2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT SEAT VARIABLE CUSHION SWITCH

HINT:
*1: RHD
*2: LHD

  1. B176312E02
    Inspect the seat variable cushion switch.

    1. Measure the resistance between the terminals when the switch is operated.

      Standard resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      a7-4 (E) - a7-3 (CSNF)*1
      b7-4 (E) - b7-5 (CSNF)*2
      FRONT
      Below 1 Ω
      a7-2 (B) - a7-5 (CSNR)*1
      b7-2 (B) - b7-3 (CSNR)*2
      FRONT
      Below 1 Ω
      a7-4 (E) - a7-5 (CSNR)*1
      b7-4 (E) - b7-3 (CSNR)*2
      FRONT
      10 kΩ or higher
      a7-2 (B) - a7-3 (CSNF)*1
      b7-2 (B) - b7-5 (CSNF)*2
      FRONT
      10 kΩ or higher
      a7-4 (E) - a7-3 (CSNF)*1
      b7-4 (E) - b7-5 (CSNF)*2
      OFF
      Below 1 Ω
      a7-1 (E) - a7-5 (CSNR)*1
      b7-1 (E) - b7-3 (CSNR)*2
      OFF
      Below 1 Ω
      a7-4 (E) - a7-5 (CSNR)*1
      b7-4 (E) - b7-3 (CSNR)*2
      OFF
      10 kΩ or higher
      a7-1 (E) - a7-3 (CSNF)*1
      b7-1 (E) - b7-5 (CSNF)*2
      OFF
      10 kΩ or higher
      a7-1 (E) - a7-5 (CSNR)*1
      b7-1 (E) - b7-3 (CSNR)*2
      REAR
      Below 1 Ω
      a7-2 (B) - a7-3 (CSNF)*1
      b7-2 (B) - b7-5 (CSNF)*2
      REAR
      Below 1 Ω
      a7-1 (E) - a7-3 (CSNF)*1
      b7-1 (E) - b7-5 (CSNF)*2
      REAR
      10 kΩ or higher
      a7-2 (B) - a7-5 (CSNR)*1
      b7-2 (B) - b7-3 (CSNR)*2
      REAR
      10 kΩ or higher

      If the result is not as specified, replace the seat variable cushion switch.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →