2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

BLUETOOTH TEL CHECK MODE

Troubleshooting · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

HINT:
Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.


ENTER DIAGNOSTIC MODE (Click here)

"BLUETOOTH" TEL CHECK

  1. E120062
    Select "'Bluetooth' TEL Check" from the "Diagnosis MENU" screen.


"BLUETOOTH" CHECK

  1. E120063
    Select "'Bluetooth' Check" from the "'Bluetooth' Handsfree Check Menu" screen.

  2. E120064
    Select "Serial Communication Log" from the "'Bluetooth' Check Menu" screen.

    1. E120065
      The communication log data in the display ECU are displayed on this screen.

      HINT:
      The displayed data can be used as a reference.

  3. E120066
    Select "Software Version" from the "'Bluetooth' Check Menu" screen.

    1. E120067E02
      Check the software version of the "Bluetooth" module.
      Screen Description: 
      Display
      Contents
      General Version/*1
      1. General software version of "Bluetooth" module
      2. If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.
      API Version/*2
      API software version is displayed.
      Upper Stack Version/*3
      Upper Stack version is displayed.
      Lower Stack Version/*4
      Lower Stack version is displayed.

      HINT:
      This function is controlled by the built-in display ECU.


HANDSFREE VOICE QUALITY SET

  1. E120068
    Select "Handsfree Voice Quality Set" from the "'Bluetooth' Handsfree Check Menu" screen.

  2. E120069E01
    Check the handsfree voice level.
    Screen Description: 
    Display
    Contents
    Received voice level adjustment/*1
    Setting possible for the voice level received from "Bluetooth" compatible phones.
    Sent voice level adjustment/*2
    Setting possible for the voice level sent to "Bluetooth" compatible phones.

    HINT:
    This function is controlled by the built-in display ECU.

    NOTICE:
    "Voice Quality Type" should not be changed.

← BLUETOOTH TEL CHECK MODE (May 2007 – Jul 2008)NAVIGATION CHECK MODE (May 2007 – Jul 2008) →