2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

62-78 DSP Error

Diagnostic trouble codes · Vehicles built May 2007 – Jul 2008

Also covers:

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
62-78
An error occurs during the decode process (MP3/WMA).
-
63-78
An error occurs during the decode process (MP3/WMA).
-

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

NOTICE:
  1. These codes may be output even if there is no malfunction.
  2. If these codes are output frequently, replace the radio receiver.


1. CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2. RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER (Click here)
OK

END


← 62-47 High Temperature (+ 63-47) (from Jul 2010)62-78 DSP Error (+ 63-78) (Aug 2008 – Jun 2010) →