2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

CD Sound Skips

Circuit diagnosis · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK CD

  1. I100152
    Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD



NG
CD IS FAULTY
OK


2. CHECK CD

  1. I100201E04
    Check the CD.

    OK:
    The CD is clean.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN CD
OK


3. CHECK OPERATION WITH ANOTHER CD
  1. Check using another CD.

    1. Check if the problem recurs using another CD.

      OK:
      The problem does not occur.



NG
Go to step 4
OK

CD WAS FAULTY

4. CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check the navigation receiver assembly installation condition.

    1. Check that the navigation receiver assembly is properly installed.

      OK:
      The navigation receiver assembly is properly installed.



NG
REINSTALL NAVIGATION RECEIVER ASSEMBLY
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)


← CD Sound Skips (Aug 2008 – Jun 2010)Radio Broadcast cannot be Received or Poor Reception (May 2007 – Jul 2008) →