CD Sound Skips
Circuit diagnosis · Vehicles built from Jul 2010
INSPECTION PROCEDURE
| 1. CHECK CD |
Check that the CD is not deformed or cracked.

- OK:
- No deformation or cracks on the CD
|
|
||||
| OK | |
| 2. CHECK CD |
Check the CD.

- OK:
- The CD is clean.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
- HINT:
- If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
|
|
||||
| OK | |
| 3. CHECK OPERATION WITH ANOTHER CD |
Check using another CD.
Check if the problem recurs using another CD.
- OK:
- The problem does not occur.
|
|
||||
| OK | ||
| ||
| 4. CHECK NAVIGATION RECEIVER ASSEMBLY |
Check the navigation receiver assembly installation condition.
Check that the navigation receiver assembly is properly installed.
- OK:
- The navigation receiver assembly is properly installed.
|
|
||||
| OK | ||
| ||
