2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

No Sound can be Heard from Speakers

Circuit diagnosis · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK AUDIO SETTINGS

  1. E120098E01
    Enter the sound adjustment screen by pressing the "SOUND" switch on the AUDIO display.

  1. Set volume, fader, and balance to the initial values and check that sound is normal.

    OK:
    Audio system returns to normal.

    HINT:
    Sound quality adjustment measures vary according to the type of the amplifier.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END


← No Sound can be Heard from Speakers (May 2007 – Jul 2008)No Sound can be Heard from Speakers (from Jul 2010) →