2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

44-78 DSP Error

Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
44-78
An error occurs during the decode process (MP3 / WMA).
Navigation receiver assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

NOTICE:
  1. This code may be output even if there is no malfunction.
  2. If this code is output frequently, replace the navigation receiver assembly.


1. CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2. RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    The same trouble does not occur.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END


← 44-78 DSP Error (May 2007 – Jul 2008)44-7D Disc cannot be Played (+ 44-7E, 44-7F) (May 2007 – Jul 2008) →