2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT POWER WINDOW SWITCH

  1. B177583E01
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (D) - 2 (SD)
    3 (B) - 4 (U)
    UP
    Below 1 Ω
    4 (U) - 5 (SU)
    1 (D) - 2 (SD)
    OFF
    Below 1 Ω
    1 (D) - 3 (B)
    4 (U) - 5 (SU)
    DOWN
    Below 1 Ω

    If the result is not as specified, replace the power window switch.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →