2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT QUICK HEATER ASSEMBLY

  1. I101090E01
    Measure the resistance of the PTC heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-1
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-2 - B-1
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-2 - B-2
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω
    A-3 - B-2
    23 to 25°C (73 to 77°F)
    0.5 to 2.5 Ω

    1. If the result is not as specified, replace the PTC heater assembly.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →