2007-2013 Highlander Kluger · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

  1. C165703
    Remove the adjusting nut.

  1. C165704
    Remove the clip.

  1. C165705
    Pull up the parking brake pedal claw and remove the No. 1 parking brake cable assembly.


2. REMOVE PARKING BRAKE SWITCH ASSEMBLY

  1. C165702
    Remove the screw and the parking brake switch assembly from the parking brake pedal.


3. REMOVE PARKING PEDAL PAD

  1. C165707
    Remove the parking pedal pad from the parking brake pedal.

← DISASSEMBLY (Aug 2008 – Jun 2010)REASSEMBLY (May 2007 – Jul 2008) →