2007-2013 Highlander Kluger · Service Manual BRAKE

REASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL PARKING PEDAL PAD

  1. C165707
    Install the parking pedal pad to the parking brake pedal.


2. INSTALL PARKING BRAKE SWITCH ASSEMBLY

  1. C165702
    Install the parking brake switch assembly to the parking brake pedal with the screw.

    Torque:
    0.9 N*m{ 9 kgf*cm , 8 in.*lbf }


3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
  1. Pass the No. 1 parking brake cable assembly through the parking brake pedal.

  1. C165704
    Install the clip to the No. 1 parking brake cable assembly.

  1. C165703
    Temporarily install the adjusting nut.

  1. C165706
    Bend the parking brake pedal claw.

← REASSEMBLY (Aug 2008 – Jun 2010)INSTALLATION (May 2007 – Jul 2008) →