2007-2013 Highlander Kluger · Service Manual BODY

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from May 2007


BACK DOOR CLOSER SYSTEM DESCRIPTION
  1. Operating any power back door switch when the back door is fully closed inputs a request signal to the power back door ECU. The power back door ECU then outputs a "latch release" command to the back door lock in response to the input.

  2. The latch can be released only when the back door is unlocked.

  3. 3 switches are built into the back door lock, and the power back door ECU monitors each switch status. The power back door ECU controls latch "release/ close" operations in response to the inputs from each switch.

    Switch
    Function
    Back door courtesy switch
    Detects whether back door is open or closed. This switch turns ON when back door is open or ajar and turns OFF when it is fully closed.
    Full-latch switch
    Detects fully closed position of latch. This switch turns ON when latch is in over-latch position.
    Sector switch
    Detects ajar position of latch. This switch turns ON when latch is in open-latch position.

← SYSTEM DIAGRAM (from May 2007)HOW TO PROCEED WITH TROUBLESHOOTING (May 2007 – Jul 2008) →