B2222 PBD Pulse Sensor Malfunction
Diagnostic trouble codes · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
DESCRIPTION
- A pulse sensor is built into the power back door drive unit to detect foreign objects and the back door position. The pulse sensor monitors the operating speed of the back door to detect foreign objects. The pulse sensor also monitors where the back door is to detect the back door position. If a pulse signal that is out of the normal range is output, the power back door drive unit (power back door ECU) will set DTC B2222.
- If DTC B2222 is set, the power back door system will be turned off and the back door will be switched to manual operation mode (not electrically controlled).
- In order to restore the power back door system to normal operation mode, first solve the problem indicated by DTC B2222 and then fully close the back door manually (reset operation).
DTC No.
DTC Detection Condition
Trouble Area
B2222
Power back door drive unit does not operate
Power back door drive unit (Power back door ECU)
INSPECTION PROCEDURE
| 1. CHECK FOR DTC |
Check for DTCs (Click here).
Clear the DTCs (Click here).
Recheck for DTCs (Click here).
- OK:
- DTC B2222 is not output.
|
|
||||
| OK | ||
| ||
