2007-2013 Highlander Kluger · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from May 2007

Battery
Standard voltage
12.5 to 12.9 V at 20°C (68°F)
Charging circuit without load
Standard amperage
10 A or less
Standard voltage
12.1 to 15.4 V
Charging circuit with load
Standard amperage
30 A or more
Generator brush holder assembly
Brush length
Standard length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum length
4.5 mm (0.177 in.)
Generator rotor assembly
Standard resistance
Slip ring
1.5 to 1.9 Ω at 20°C (68°F) (w/ Rear heater assembly or multi-information display)
2.3 to 2.7 Ω at 20°C (68°F) (w/o Rear heater assembly and multi-information display)
Slip ring - Rotor
1 MΩ or higher
Slip ring diameter
Standard diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum diameter
14 mm (0.551 in.)
← TORQUE SPECIFICATIONS (from May 2007)TORQUE SPECIFICATIONS (from May 2007) →