2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

5C-45 Shift Signal Communication Error

Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
5C-45
No signal is transmitted from the ECM.
  1. Wire Harness (CAN communication system)
  2. Park/Neutral Position Switch
  3. ECM
  4. Television Camera ECU

INSPECTION PROCEDURE


1. CHECK CAN COMMUNICATION SYSTEM (TELEVISION CAMERA ECU - ECM)
  1. Refer to "HOW TO PROCEED WITH TROUBLESHOOTING" in the CAN communication system (Click here).


NEXT

END


← 5C-45 Shift Signal Communication Error (May 2007 – Jul 2008)Display Signal Circuit between Television Camera ECU and Television Camera Assembly (May 2007 – Jul 2008) →