2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from May 2007


ILLUMINATED ENTRY SYSTEM
  1. General

    1. The illuminated entry system has the following control functions:

      Control
      Outline
      Lights that Operate
      Actuation Area-linked*2
      When the key enters any actuation area around the doors, the lights that operate turn on.
      1. Door Mirror Foot Lights
      2. Engine Switch Illumination
      3. Personal Light
      4. Interior Lights
      Door Control Transmitter-linked
      When any door is unlocked using the transmitter, the lights that operate turn on.
      1. Ignition Key Cylinder Light*1
      2. Engine Switch Illumination*2
      3. Personal Light
      4. Interior Lights
      5. Door Mirror Foot Lights
      Door Open-linked
      When any door is opened, the lights that operate turn on.
      1. Ignition Key Cylinder Light*1
      2. Engine Switch Illumination*2
      3. Personal Light
      4. Interior Lights
      Door Close-linked
      When all doors and back window are closed, the lights that operate turn off
      Door Lock-linked
      When all doors are locked, the lights that operate turn off.
      1. Ignition Key Cylinder Light*1
      2. Engine Switch Illumination*2
      3. Personal Light
      4. Interior Lights
      5. Door Mirror Foot Lights
      Ignition Switch-linked*1
      Engine Switch-linked*2
      When the ignition switch*1/engine switch*2 is changed from on (ACC or IG) to off, the lights that operate turn on.
      1. Ignition Key Cylinder Light*1
      2. Engine Switch Illumination*2
      3. Personal Light
      4. Interior Lights
      Battery Saving
      When no changes occur in the condition of the doors for 20 minutes and a key is not in the ignition key cylinder, these lights turn off*1.
      When no changes occur in the condition of the doors for 20 minutes and a key is not in the actuation area, these lights turn off*2.
      1. Ignition Key Cylinder Light*1
      2. Engine Switch Illumination*2
      3. Personal Light
      4. Interior Lights
      5. Door Mirror Foot Lights
      *1: w/o Smart Entry and Start System
      *2: w/ Smart Entry and Start System


AUTOMATIC LIGHT CONTROL SYSTEM
  1. When the light control switch is in the AUTO position, the light control sensor detects the ambient light level and automatically turns the headlights, taillights, parking lights, and license plate lights ON or OFF.
  2. This system is controlled by the main body ECU (instrument panel junction block).

LIGHT AUTO TURN-OFF SYSTEM
The light automatic turn-off system is used to prevent forgetting to turn off the exterior lights (headlights, taillights, parking lights, license plate lights).
  1. This system is controlled by the main body ECU (instrument panel junction block).
  2. This system is enabled when the conditions given below are met:
    1. The ignition switch is off or on (ACC).
    2. The light control switch is in the TAIL or HEAD position.
    3. Driver side door is opened.

POWER DISTRIBUTOR
The power distributor uses non-contact type semiconductor relays to reduce the weight of the relay block. The headlight relay LH, headlight relay RH and high beam headlight relay are integrated in the power distributor. The power distributor has LO-beam headlight control function and HI-beam headlight control function.
E142673E01
← SYSTEM DIAGRAM (from May 2007)HOW TO PROCEED WITH TROUBLESHOOTING (from May 2007) →