2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


WIRELESS DOOR LOCK CONTROL SYSTEM
The wireless door lock control system functions to lock and unlock all the doors from a distance. The system is controlled by a hand-held transmitter which sends radio waves to the door control receiver. The certification ECU (smart key ECU assembly) performs an ID code identification process and engages the door lock control.

FUNCTION OF MAIN COMPONENTS
Component
Function
Door control transmitter
  1. Has LOCK, UNLOCK, PANIC*1 and POWER BACK DOOR*2 switches.
  2. Transmits weak radio waves (recognition codes and function codes) to the door control receiver.
Door control receiver
Receives weak radio waves from the door control transmitter and sends them to the certification ECU (smart key ECU assembly).
  1. Front door courtesy light switch
  2. Rear door courtesy light switch
  3. Back door courtesy light switch
Turns on when a door is opened and turns off when it is closed. Outputs door status codes (open or closed) to the main body ECU.
Door lock position switch
Transmits the door lock positions of each door to the main body ECU.
Certification ECU (Smart key ECU assembly)
Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each ECU.

HINT:
  1. *1: for RHD
  2. *2: w/ Power Back Door System


SYSTEM FUNCTION
The door control transmitter has the LOCK, UNLOCK, PANIC (for RHD), POWER BACK DOOR (w/ Power Back Door System) switches. Operating these switches activates each function.
The wireless door lock control system has the following functions:

HINT:
The default settings of the following functions are ON. Part of these functions can be customized (Click here).

Function
Operation
All door lock
Pressing the LOCK switch locks all doors.
All door unlock*1
Pressing the UNLOCK switch unlocks all doors.
All door unlock*2
(Unlock 2 operation)
Pressing the UNLOCK switch twice within 3 seconds unlocks all the doors after the driver's door is unlocked.
Power back door open/close operation*3
Pressing the POWER BACK DOOR switch of the transmitter for longer than about 1 second opens or closes the back door.
Automatic lock
If none of the doors is opened within 30 seconds after they are unlocked by the wireless door lock control, all the doors will lock again automatically.
Answer back
  1. When the doors are locked by wireless operation, the hazard warning lights flash once, and wireless door lock buzzer*1 sounds once.
  2. When the doors are unlocked by wireless operation, the hazard warning lights flash twice and wireless door lock buzzer*1 sounds twice.
Panic alarm*1
Pressing the PANIC switch of the transmitter for longer than about 0.8 seconds causes the following alarms to activate:
  1. Sounds the horn and security horn.
  2. Flashes the hazard lights.
  3. Illuminates the front interior light (when the switch is in the DOOR position).
While the panic alarm is operating, pressing any switch of the transmitter cancels the alarm operation.
Door ajar warning
The buzzer sounds when the LOCK switch is pressed when any of the doors are ajar, and it sounds for 10 seconds continuously. The buzzer stops when all doors are closed or the UNLOCK switch is pressed.
Illuminated Entry
When all the doors are locked, pressing the UNLOCK switch causes the interior light to come on simultaneously with the unlock operation.

HINT:
  1. *1: for RHD
  2. *2: for LHD
  3. *3: w/ Power Back Door System

← SYSTEM DESCRIPTION (May 2007 – Jun 2010)HOW TO PROCEED WITH TROUBLESHOOTING (May 2007 – Jul 2008) →