2007-2013 Highlander Kluger · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE FRONT SEAT HEADREST ASSEMBLY

2. REMOVE FRONT OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


3. REMOVE FRONT INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


4. REMOVE REAR OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


5. REMOVE REAR INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side (Click here).


6. REMOVE FRONT SEAT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side (Click here).


7. REMOVE RECLINING POWER SEAT SWITCH KNOB

HINT:
Use the same procedure for the RH side and the LH side (Click here).


8. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

HINT:
Use the same procedure for the RH side and the LH side (Click here).


9. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

  1. B170955
    Disengage the 2 hooks.

  1. B170956
    Remove the 5 screws.

  1. Disengage the 2 claws and remove the front seat cushion shield assembly.


10. REMOVE FRONT SEAT INNER BELT ASSEMBLY
  1. Disconnect each connector and clamp.

  1. B170958
    Remove the nut and front seat inner belt assembly.


11. REMOVE FRONT SEAT CUSHION INNER SHIELD

  1. B170960
    Remove the screw.

  1. Disengage the 2 claws.

  1. B170961
    Disengage the guide and remove the front seat cushion inner shield.


12. REMOVE POWER SEAT SWITCH

HINT:
Use the same procedure for the RH side and the LH side (Click here).


13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

  1. B170965
    Disconnect the connector.

  1. Disengage the 3 clamps.

  1. B170964
    w/ Front Seat Side Airbag:

    1. Disconnect the connector.

    2. Disengage the 4 clamps.

  1. B170900
    Disconnect the occupant detection sensor connector as shown in the illustration.

  1. B170966
    Disengage the 4 hooks.

  1. B170972
    Remove the 2 clips.

  1. Disconnect each hook and remove the separate type front seat cushion cover with pad.

    B170967


14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD

  1. B170968
    Remove the 6 hog rings.

  1. B170970
    Remove the 15 hog rings and separate type front seat cushion pad from the separate type front seat cushion cover.

← REMOVAL (May 2007 – Jul 2008)REMOVAL (from Jul 2010) →